Premium Aluminum Freestanding Triple Monitor desk stand - 13" to 27" - Max Load 17.6 lbs each

holding 3 27'' msi monitors. works fine also the fine tuning is decent all 3 are perfectly aline. just be carefull even with the heavy foot is will lean forward if you pull the outside screen in / it will fall forward.

This holds my three 27” Samsung monitors. The center pole should be longer. Monitors are hanging too low even if you slide all the way up.Strong aluminum built.

Having 2 people to set this up would be helpful. It is heavy and hard to balance while attaching the left and right monitors. I have 3 - 27" monitors which are too large to accurately adjust the left and right monitors. Would work better on smaller monitors.

It's pretty rare that I rate something this high but this monitor stand was VERY well thought out in almost every aspect, but the best feature that comes to mind is that you install part of the mount onto the back of your monitor and then it slides/drops into place on the stand.My only suggestion/request to the maker would be to make the slide mounts on the stand "track" driven with a screw (yes it would make it more of a pain to initially set, but would make micro adjustments MUCH easier once the monitors are on it) and increase the hinge adjustment to more than 25 degrees.Love these things (I own two) and would highly recommend them!

not too easy to install. But for the sturdiness it is really good. Over all it is a great product and worthy.

So simple and functional – works super well on my electric standing desk. No giant clamps needed that interfere with the desk going to the full down position for seating like there was with another model I had to return . Very stable when the desk is in standing position as well. The big flat black base blends in perfectly and is unobtrusive. It really helps having three monitors.

Great product. Would have given it 5 stars if you could adjust the height of the individual monitors a bit more. I have 3 27 samsungs, and one of them is one model older than the other 2, and the mount point is higher by 2 inches. I made it work by changing the spacers around on the outside arm's. Very good quality

Just got mine and assembled it this morning. Seems very solidly built and I'm pleased with the quality. The instructions were only OK and the parts and diagrams were too small for my liking.As others have mentioned, there is a longer "central" arm that your center monitor mounts to, and at either end, attaches to smaller "swing" arms which are where your left and right monitors go. There is an intentional design aspect where these arms can be angled so the left and right arms are moved to be angled towards you, which means the left and right monitors will also be angled that way.These arms do NOT angle enough though, and the three monitor setup I have is now too flat, instead of the left\right being angled more towards my head. A side effect of this is that it makes this a not awesome setup for a corner cube desk as you cannot get the whole unit very far back into the corner, which was not a problem at all when I had my three monitors on individual stands.

Pros: very solid. Good quality construction. Easy to setup. Looks great and really tidies up the desktop!Cons: Very minimal cable mgmt capability. I'd prefer if there was a substantial cable channel at the back of the vertical post, and perhaps a way to run keyboard and mouse cables underneath the stand.A number of commenters noted that two people were required for assembly - one to balance/support the stand while the other installed the monitors on each end of the stand. I found it was quite easy to assemble by myself - I used the box it came in to support one end while I installed the monitor on the other end. The box was almost a perfect height for this use.

Be careful with this one. I bought it thinking, incorrectly, that I might just sit it on my desk. I caught it before it fell over. Facts are facts. I had to drill two holes and buy bolts for the stand in order to use it. It does exactly what I want, just wish I didn't have to drill more holes to make it do it.

Using this with three 27" monitors puts it at the upper limit of its capacity, and it really seems to hold up well. Since it's free-standing and in my case at the limits of its capacity, it will of course rock a bit if bumped, but you'd expect that of anything with those long arms and not bolted to the desk. Since a person doesn't normally handle their monitors much, it isn't really an issue. I had no problem using the buttons on my monitors to set their colors and get them adjusted. As for the actual mounting, it took some finicking and finessing to get all the monitors lined up just right, not to mention some spacers on the outer monitors, but luckily enough the VESA mounts and the mounting hardware that's included allows you to do so. My only complaint about the hardware itself is the stiffness of the VESA mounts in trying to tilt the monitors. It looks like there may actually be a screw which could be loosened to alleviate some of that stiffness, but the instructions don't indicate that's what it is for and I decided to grunt and curse a bit rather than loosen anything, especially since that very stiffness guarantees that once I do get them grunted and cursed into place they're going to stay there. In the end, everything is lined up beautifully and I really couldn't ask for a better stand at this price point. Also note that, though I do have slim bezel 27" monitors, I ended up with the outer mounts slid in more than 2" from their furthest outer point, so there is plenty of room to install even the widest-bezeled 27" monitor if that's a concern.This was also a closer fit in the physical space that I have than I would have liked simply because of the design, which has two important points you need to note, though I wouldn't call them actual flaws and didn't deduct any stars for them. First, note that between the support bar going to the stand and the VESA mount for the center monitor, that whole assembly puts the monitors at least 8" out from whatever's behind them. Not an issue for a lot of folks, but I would have liked it if the center VESA mount had been made permanently centered and incorporated into the stand's vertical bar, which would have at least halved that depth. Others may actually prefer trading off that extra depth requirement in return for the sliding center mount for some reason, though I can't really figure out why your center monitor wouldn't be...well...centered.Second, and possibly the most important: Note that the arms don't swing forward very far at all. I had three monitors set up differently before, and did have them at a bit more of an angle to wrap around more. That main picture is about the furthest extent of how far you can swing the arms as it comes out of the box. With 27" monitors, that makes for a VERY wide setup. The decrease in angle from what I was doing before added quite a few inches to the horizontal space needed for the monitors overall. I understand the limitation, though, if nothing else because increasing the angle any further would likely overcome the base's ability to stay on the desk and the monitors would just tip forward. I will tell you that (providing you can clamp the rear of the stand to your desk or are using smaller and lighter monitors), the stop that limits the swing of the two arms is actually a very small nib that could be cut off easily and allow the arms to swing a bit more forward if you so desire. I started to do so myself, but in the end managed to just squeeze the monitors into the space I had and thus didn't actually modify the stand as I've described.