Skip to the beginning of the images gallery

Wallplate HDMI/VGA HDBaseT Kit

Wallplate design allows you to select and switch between any of the 2 source devices, 1 HDMI and 1 VGA, to display on an HDMI display up to 30 meters with audio output and microphone inputs. Great for education, boardrooms, waiting rooms

In stock

Quantity in stock: 8

SKU

CE-H23Z11-S1

$999.99

Join our free Membership Program and save 5% off every order

We ship all orders within 1 business day

Lifetime technical support on all of our products

45-day return window and money-back guarantee

WARNING: This product can expose you to chemicals including Cadmium, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Overview

Features Features HDBaseT extender with wall plate designed Transmitter and Control Panel and wall mounting Receiver box Allows you to switch freely between your HDMI and VGA input device via push button IR receiver on the Control Panel controls a projector or other display device at the remote location Output resolutions: 1024x768, 1280x720, 1280x800, 1360x768, 1600x1200, 1920x1080, or 1920x1200 Supports transmission distance up to 98ft (30m) at 1920x1200 @60Hz over CAT cabling Supports PoC to power the Transmitter, Control Panel and Receiver via a single power adapter connected to the Receiver Easy-to-use Control Panel for convenient device control in showrooms, classrooms, and boardrooms Supports IR learning of the display device's (projector, TV, etc.) IR remote for easy device control at the Control Panel

Specifications

Package Contents Specifications Supports HDCP 1.4 Output resolution: 1024x768, 1280x720, 1280x800, 1360x768, 1600x1200, 1920x1080, or 1920x1200 Bandwidth: 10.2Gbps Switch freely between HDMI and VGA signal input Supports MIC input Amplifier output: 2x20Watt @ 4ohms Customizable control panel supports IR learning for convenient device control Supports UPNP Product: Transmitting unit (TX): Dimensions: 4.14" (W) x 3.50" (H) x 1.74" (D) Weight: 0.53 lbs Connectors: 1x 19-pin HDMI, Type A, Female, Input 1x 15-pin VGA, D-Sub, Female, Input 1x 3.5mm, Stereo Audio, Input 1x 8-pin, RJ45, HDBaseT/PoC output 1x 8-pin, RJ45, Connect to Control Panel Power/RS-232 1x Blue-Backlight button, Source select 1x 4-pin USB Type-B, Female, Connect to PC 1x 5-pin Micro USB, Firmware update 1x Reset button Receiving unit (RX): Dimensions: 9.84" (W) x 1.22" (H) x 5.12" (D) Weight: 3.31 lbs Connectors: 1x 19-pin HDMI, Type A, Female, Output 1x 8-pin, RJ45, HDBaseT/PoC input 1x 8-pin, RJ45, TCP/IP Network 1x 4-pin USB, Touchscreen 1x 3.5mm jack, IR Out 1x 3-pin, RS-232, Phoenix connector 1x 2-pin, Remote Mute, Phoenix connector 1x 3-pin, Audio Line out, Phoenix connector 1x 3-pin, MIC input, Phoenix connector 1x 4-pin, 2x20Watt @ 4ohms, Power connector 1x Power jack, DC 24V input Control Panel: Dimensions: 4.49" (W) x 2.76" (H) x 1.34" (D) Weight: 0.31 lbs Connectors: 1x 4-pin USB Type-A, U-disk configuration data 1x 8-pin, RJ45, Connect to Transmitter Power/RS-232 1x Volume Knob, volume control 4x Blue-backlight button, ON / HDMI / VGA / OFF control 1x IR sensor, receive IR signal via IR remote 1x 3-Pin, RS-232, Phoenix connector 1x 5-pin, Micro USB, Firmware update Power adapter: Input: 100-240V / 50-60Hz Output: DC 24V/2.71A Environmental conditions: Operating temperature: 32 to 122 degrees F Storage temperature: 14 to 158 degrees F Relative humidity: 10% to 90% RH (non-condensing) Certifications/Standards: FCC, CE, RoHS Warranty: 3 years limited Country of origin: China Package contents Wallplate HDMI/VGA HDBaseT Kit (Transmitter / Receiver / Control Panel) Power adapter Receiver mounting ears (2) Screws (4) Receiver rubber feet (4) 4-Pin Terminal Block (2x20Watt@4ohm port) 3-Pin Terminal Block Line out/RS-232 (3) 2-Pin Terminal Block Remote Mute port IR emitter USB A to B control cable White face plate User manual