We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Full HD HDMI Over IP Extender Kit, Many to Many, RS-232 Serial and IR Control, 1080p 60Hz, 120m
OverviewExtends high definition 1080p HDMI signals from a source device to a display device through economical Cat5e/6/7 cabling up to 120 meters using advanced HDbitT over IP technologyFeaturesExtend and control HDMI signals with stereo audio up to 394ft (120m) to the remote display with HDbitT over IP technology and supports multi-casting connection for optimal (the best) application What is HDbitT?HDbitT is a new generation audio/video digital connection transmission protocol solution. Provides stable performance, long-distance transmission, and high-definition signal Further DistanceThis HDMI over IP Extender with IR-Kit designed for transmission/security, HDMI signals up to 394ft (120m) through HDbitT protocol and Gigabit Ethernet switch to a remote HDMI display Highly ScalableWorks as a scalable TX/RX matrix over the dedicated IP network and allows up to 256 total units, limited to 100 units per encoder (TX), decoder (RX) up to 255, and extends/splits HDMI signals to multiple displays. The additional encoder (TX) unit (part#- CE-H23B11-S2) and decoder (RX) unit (part#- CE-H23C11-S2) is sold separately Multicasting connectionis transmitting data from multiple HDMI sources over an IGMP network switch to the intended receivers (RX) via Transmitters (TXs)Full HD ResolutionSupports high-definition video resolution up to1080p (1920x1080) @60Hz, HDCP 1.4 to deliver a clear picture quality and local HDMI loop-out allows you to monitor the extended display from the source locationIR ExtensionIR pass-through feature allows remote control of the HDMI source device and playback function at the remote display High PerformanceOffers a true 10.2Gbps video bandwidth and supports stereo audio RS-232 ControlBi-direction function and pass-through connection to control RS-232 enable devices in either direction Flexible ControlEasily switch and setup remote displays via front panel LED digital channel buttons or attached remote control, and video control software Multiple Connectivity PortsComes with one HDMI video input port, one HDMI video loop-out port, one HDMI video output port, two RJ45 network ports, two RS-232 ports, one 3.5mm IR emitter port, one 3.5mm IR receiver port, Channel switch buttons, Connect TX channel buttons, two reset buttons, two DC power jacks (5V/2A) ConnectionH.264 CompressionHDMI signal is encoded into H.264 to be sent through the network router or switch then decoded before arriving at the specified display. Ensures enough bandwidth is available to pass multiple HDMI signals over one networkMaximum CompatibilitySupports Plug-n-play. No driver installation required. Metal Housing DesignProtects the inside PCBA, also enhance the heat dissipation for better performance. Military-grade component for long service life
|
• Video Conference room | • Show room | • Classroom | • Broadcasting | • Digital signage | • Dental office |
• Hospitality | • Supermarket | • Shopping center | • Sport bar | • Restaurant | • Retail |
• Trade show | • Church | • Airport | • Control center | • Security center | • Surveillance control center |
Need to Know Before Buying
1. Please confirm your computer or device with HDMI port
2. Check the extended and local displays/monitors with HDMI port and support 1080p@60Hz resolution
3. Please ensure using UTP Cat5e/Cat6/Cat7 cable for the best video quality and accurate transmission distance
4. IGMP Switch or Managed Ethernet Switch is recommended for the best performance and reliability
5. Transmitter (TX) channel must be different, otherwise the system will be broken down
Specifications
InterfaceEncoder unit (TX): Decoder unit (RX):
Package contents |
Frequently Asked Questions (Q&A)
Reset TX to defaultPlease press the both two buttons beside the "TX ID" display and keep 3 seconds to reset the product Reset RX to defaultPlease press the both two buttons beside the "TX connected" display and keep 3 seconds to reset the product...
The Over IP extender are using Multicast Protocol, please check do the Switch and Router can support Multicast packet pass through