We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
HDMI 4K30Hz HDbitT over IP Extender - Receiver
OverviewAdditional receiver unit for CE-H25D11-S2 kit, adds an additional display to a single transmitter within your network, 4K30Hz, 394ft/120m, HDCP 1.4, One to Many, Many-to-Many, IR ControlFeaturesTransmits HDMI audio and video signals to a remote display/monitor over UTP Cat6/7 cable up to 394ft (120m) and sends the 4K HD resolution to the receiver for stable transmission and cost saving. Allows multiple receivers to be used simultaneously in multiple configurations What is HDbitT?HDbitT is a new generation audio/video digital connection transmission protocol solution. Provides stable performance, long-distance transmission, and high-definition signal Extend DistanceThis HDMI 4K30Hz HDbitT over IP Extender designed for transmission/security, HDMI signals up to 394ft (120m) through HDbitT protocol and Gigabit Ethernet switch to a remote HDMI display
*Note: IGMP Gigabit Switch is recommended for best performance and reliability VLAN setup supportedcreate a separate VLAN for each TX and its corresponding RX’s 4K HD ResolutionSupports high-definition video resolution up to 4K (3840x2160) @30Hz, HDCP 1.4 to deliver a crystal-clear picture quality IR ExtensionIR pass-through feature allows remote control of the HDMI source device and playback function at the remote display High PerformanceOffers a true 10.2Gbps video bandwidth and supports stereo audio Multiple Connectivity PortsComes with one HDMI output port, one RJ45 network port, one 3.5mm IR receiver port, one reset button, one DC power jack (5V/2A) ConnectionMaximum CompatibilitySupports Plug-n-play. No driver installation required The reset button allows displays to be re-detected if no displays are detected Metal Housing DesignProtects the inside PCBA, also enhance the heat dissipation for better performance. Military-grade component for long service life
|
• Digital signage | • Broadcasting | • Video conference room | • Show room | • Classroom |
• Dental office | • Hospitality | • Supermarket | • Shopping center | • Sport bar |
• Restaurant | • Retail | • Trade show | • Church | • Airport |
• Control center | • Security center | • Surveillance control center |
Need to Know Before Buying
1. Please confirm your computer or device with HDMI port
2. Check the extended display/monitor with HDMI port and supports 4K@30Hz resolution
3. Please ensure using UTP Cat6 or Cat7 cable for the best video quality and accurate transmission distance
4. IGMP Switch or Managed Ethernet Switch is recommended for the best performance and reliability
5. This receiver (CE-H25E11-S2) is only for CE-H25D11-S2
Specifications
InterfaceReceiver unit (RX):
Package contents |