Features
Extends HDMI audio and video signals to remote displays up to 394ft (120m) over UTP Cat6/7 cable using the best network transport protocol and IR remote control of source devices
![fea](https://www.siig.com/pub/media/wysiwyg/Images/CE-H24B11-S1/features_h24b.gif)
High Performance
Offers a true 10.2Gbps video bandwidth and supports stereo audio
![band](https://www.siig.com/pub/media/wysiwyg/Images/CE-H24B11-S1/Bandwidth_h24b.gif)
Extend Distance
This HDMI HDbitT over IP Extender designed for transmission/security, HDMI signals up to 394ft (120m) through HDbitT protocol and Gigabit Ethernet switch to a remote HDMI display
![dis](https://www.siig.com/pub/media/wysiwyg/Images/CE-H24B11-S1/distance_h24b.gif)
What is HDbitT?
HDbitT is a new generation audio/video digital connection transmission protocol solution. Provides stable performance, long-distance transmission, and high-definition signal
![hdbit](https://www.siig.com/pub/media/wysiwyg/Images/CE-H24B11-S1/hdbitt_h24b.gif)
Full HD Resolution
Supports high-definition video resolution up to 1080p (1920x1080) @60Hz, HDCP 1.2 to deliver a clear picture quality
IR Extension
IR pass-through feature allows remote control of the HDMI source device and playback function at the remote display
Highly Scalable
Works as a scalable TX/RX matrix over the dedicated IP network and extends/splits HDMI signals to multiple displays. Allows up to 256 total units, the additional receiver unit (part#- CE-H24V11-S1) is sold separately
*Note: IGMP Gigabit Switch is recommended for best performance and reliability
![one](https://www.siig.com/pub/media/wysiwyg/Images/CE-H24B11-S1/onetoone_h24b.gif)
![many](https://www.siig.com/pub/media/wysiwyg/Images/CE-H24B11-S1/onetomany_h24b.gif)
![multi](https://www.siig.com/pub/media/wysiwyg/Images/CE-H24B11-S1/multi_h24b.gif)
VLAN setup supported
create a separate VLAN for each TX and its corresponding RX’s
Multiple Connectivity Ports
Comes with one HDMI video input port, one HDMI video loop-out port, one HDMI output port, two RJ45 network ports, one 3.5mm IR emitter port, one 3.5mm IR receiver port, two reset buttons, two DC power jacks (5V/1A)
![ports](https://www.siig.com/pub/media/wysiwyg/Images/CE-H24B11-S1/ports_h24b.gif)
Connection
![conn](https://www.siig.com/pub/media/wysiwyg/Images/CE-H24B11-S1/connect_h24b.gif)
Maximum Compatibility
Supports Plug-n-play. No driver installation required
The reset button allows displays to be re-detected if no displays are detected
Metal Housing Design
Protects the inside PCBA, also enhance the heat dissipation for better performance. Military-grade component for long service life