Features
Extends HDMI audio and video signals up to 394ft (120m) to a remote 4K HD display/monitor via Cat6/7 cable with HDbitT over IP technology and supports multi-casting connection for the best application
![fea](https://www.siig.com/pub/media/wysiwyg/Images/CE-H24A11-S1/features_h249.gif)
Extend Distance
This HDMI 4K60Hz over Cat6 Extender with IR designed for transmission/security, HDMI signals up to 394ft (120m) through HDbitT protocol and Gigabit Ethernet switch to a remote HDMI display
![dis](https://www.siig.com/pub/media/wysiwyg/Images/CE-H24A11-S1/distance_h249.gif)
What is HDbitT?
HDbitT is a new generation audio/video digital connection transmission protocol solution. Provides stable performance, long-distance transmission, and high-definition signal
![hdb](https://www.siig.com/pub/media/wysiwyg/Images/CE-H24A11-S1/hdbitt_h249.gif)
High Performance
Offers a true 18Gbps video bandwidth and supports stereo audio
![band](https://www.siig.com/pub/media/wysiwyg/Images/CE-H24A11-S1/bandwidth_h28a.gif)
Highly Scalable
Works as a scalable TX/RX matrix over the dedicated IP network and allows up to 256 total units to extend/split HDMI signals to multiple displays. The additional receiver unit (part#- CE-H24A11-S1) is sold separately
*Note: IGMP Gigabit Switch is recommended for best performance and reliability
![one](https://www.siig.com/pub/media/wysiwyg/Images/CE-H24A11-S1/onetoone_h249.gif)
![many](https://www.siig.com/pub/media/wysiwyg/Images/CE-H24A11-S1/onetomany_h249.gif)
![multi](https://www.siig.com/pub/media/wysiwyg/Images/CE-H24A11-S1/multi_h249.gif)
VLAN setup supported
create a separate VLAN for each TX and its corresponding RX’s over an IGMP network switch
4K HD Resolution
Supports high-definition video resolution up to 4K (3840x2160) @60Hz, HDCP 2.2 to deliver stunning crystal clear picture quality
IR Extension
IR pass-through feature allows remote control of the HDMI source device and playback function at the remote display
Multiple Connectivity Ports
Comes with one HDMI output port, one RJ45 network port, one 3.5mm IR receiver port, one reset button, one DC power jacks (5V/3A)
![port](https://www.siig.com/pub/media/wysiwyg/Images/CE-H24A11-S1/ports_h24a.gif)
Connection
![conn](https://www.siig.com/pub/media/wysiwyg/Images/CE-H24A11-S1/connect_h24a.gif)
Maximum Compatibility
Supports Plug-n-play. No driver installation required
The reset button allows displays to be re-detected if no displays are detected
Metal Housing Design
Protects the inside PCBA, also enhance the heat dissipation for better performance. Military-grade component for long service life