Full HD HDMI over IP Extender, Many to Many, PoE, Serial and IR Control, 100m - Decoder (RX) for CE-H26411-S1, TAA Compliant

• Features
• Applications
• Need to Know Before Buying

---

Overview

Receives HDMI signals from a remote source device over UTP CAT5e/6 cabling up to 100 meters using PoE Gigabit switches. TAA compliant

---

Features

Extends HDMI audio and video signals to a remote display over UTP Cat5e/6 cabling up to 330ft (100m), and sends the Full HD resolution to the receiver for reliable, stable transmission and cost savings. Allows multiple receivers to be used simultaneously in multiple configurations



---

Long Distance

This Full HD HDMI over IP Extender designed for reliably extends HDMI signal up to 330ft (100m) through Ethernet network to a remote HDMI display



---

Highly Scalable

Works as a scalable TX/RX matrix over the dedicated IP network, and allows up to 256 total units, limited to 64 transmitters (TX). Requires additional encoder (TX) unit (part#- CE-H26411-S1) and decoder (RX) unit (part#- CE-H26511-S1) sold separately
*Note: IGMP Gigabit Switch is recommended for best performance and reliability










---

IR / RS-232 Extension

IR Pass Back function and RS-232 signal transmission to control the source device signal from a remote RX location allows you to select and switch between source devices (Matrix mode only)





Full HD Resolution

Supports high-definition video resolution up to 1080p (1920x1080) @60Hz for stunning and clear image and HDMI loop-out on the TX to connect to a local display for monitoring

---

H.264 Compression

HDMI signal is encoded into H.264 to be sent through the network router or switch then decoded before arriving at the specified display. Ensures enough bandwidth is available to pass multiple HDMI signals over one network

---

High Performance

Offers a true 10.2Gbps video bandwidth and supports stereo audio



---

Flexible Control

Easily control or setup remote displays via front panel LED digital channels, software, and web GUI control. DIP switch in matrix mode provides the quick setting of transmitter and receiver matching channels that is your best choice



---

Multiple Connectivity Ports

Comes with one HDM video output port, one RJ45 network port, one 3.5mm phone jack for IR remote control, one RS-232 port for signal transmission, one DIP switch, and one DC power jack (5V/2A, option)



Connection



---

Fast Ethernet Data Transmission

Reliable wired network connectivity through embedded 10/100BASE-T Ethernet port
*Note: Gigabit switch is recommended for PoE

---

PoE Technology

Allows the power supply connected to either the TX or RX unit by Ethernet port to power both units, compatible RJ45 power input provides 36V-57V / 7W power via a PoE switch (purchase separately), making it easy to construct and improve system robustness. No additional power adapter required

---

Maximum Compatibility

Supports Plug-n-play. The reset button allows re detection of all the displays if any of the displays are not detected

---

TAA Compliant

Completely manufactured in a TAA designated country

---

Metal Housing Design

Protects the inside PCBA, also enhance the heat dissipation for better performance. Military-grade component for long service life

---

ESD Protection

An ESD protection device protects a circuit from an electrostatic Discharge (ESD), in order to prevent a malfunction or breakdown of an electronic device

---

Applications

• Classroom	• Conference room	• Control room	• Broadcasting	• Gaming
• Exhibitions	• Shopping center	• Hospitality	• Sport bar	• Restaurant
• Retail	• Trade show	• Church	• Airport

---

Need to Know Before Buying

1. Please confirm your computer or devices with HDMI port



2. Check the extended and local displays/monitors with HDMI port and support 1080p @60Hz resolution



3. Please choose the PoE switch or IGMP Ethernet Switch with PoE function for reliability and best performance

4. Please ensure using UTP Cat5e or Cat6 cable for the best video quality and accurate transmission distance

• Interface
• Package Contents

---

Specifications

Video
HDMI	1x output
Resolution	1080p/1080i/720p/480i/480p @60Hz
Compression	H.264 compression video format Full HD encoder/ decoder MP3 compression audio format stereo 192Kbps encoder/ decoder Media stream up to 18Mbps
Internet protocol
TCP, UDP, RTSP, RTP, DHCP, IGMP, Multicast, IPV4
Audio
Stereo audio from HDMI, support 192Kbps bit rate
Fast ethernet
Data transfer rate: up to 100Mbps, backward compatible with 10Mbps
Power
Power adapter	DC 5V/2A, 5.5mm (OD)x 2.1mm (ID) x 10mm (D) (optional, without PoE switch)
RJ45 with PoE (Power over Ethernet)	36V to 57V, 7W input
DIP switch
6-bit switch for 64 stream channel selection
RS-232
Full Duplex RS-232 pass-through up to 115,200bps through connector for RS-232 cable bi-directional remote extension
Environmental conditions
Operating temperature	32 to 122 degrees F
Storage temperature	14 to 158 degrees F
Relative humidity	5% to 90% RH (non-condensing)
Product Info
Dimensions	5.12” (L) x 3.24” (H) x 1.19" (W)
Weight	0.64 lbs
Color	black
Housing material	metal
Unit package
Dimensions	6.54” (L) x 5.35” (H) x 2.17" (W)
Weight	0.94 lbs
Certifications/Standards
FCC, CE, RoHS, REACH, TAA compliant
UPC code: 662774043692
Warranty: 2 years limited
Country of origin: Taiwan

---

Interface



Decoder (RX) Input:

• 1x 9-pin, RS-232 serial, pass-through
• 1x 6-pin, DIP switch, for channel matching
• 1x 8-pin, RJ45, Ethernet
• 1x 3.5mm Infrared jack, IR emitter
• 1x DC power jack, 5V/2A
• 1x Reset button

Output:

• 1x 19-pin, HDMI, Female

---

Package contents

• 1x Full HD HDMI Extender over IP with PoE, RS-232 & IR - Decoder (RX)
• 1x IR receiver cable
• 1x User Reference Guide