Full HD HDMI Over IP Extender Kit, Many to Many, RS-232 Serial and IR Control, 1080p 60Hz, 120m

• Features
• Applications
• Need to Know Before Buying

---

Overview

Extends high definition 1080p HDMI signals from a source device to a display device through economical Cat5e/6/7 cabling up to 120 meters using advanced HDbitT over IP technology

---

Features

Extend and control HDMI signals with stereo audio up to 394ft (120m) to the remote display with HDbitT over IP technology and supports multi-casting connection for optimal (the best) application



---

What is HDbitT?

HDbitT is a new generation audio/video digital connection transmission protocol solution. Provides stable performance, long-distance transmission, and high-definition signal



---

Further Distance

This HDMI over IP Extender with IR-Kit designed for transmission/security, HDMI signals up to 394ft (120m) through HDbitT protocol and Gigabit Ethernet switch to a remote HDMI display



---

Highly Scalable

Works as a scalable TX/RX matrix over the dedicated IP network and allows up to 256 total units, limited to 100 units per encoder (TX), decoder (RX) up to 255, and extends/splits HDMI signals to multiple displays. The additional encoder (TX) unit (part#- CE-H23B11-S2) and decoder (RX) unit (part#- CE-H23C11-S2) is sold separately
*Note: IGMP Gigabit Switch is recommended for best performance and reliability










Multicasting connection

is transmitting data from multiple HDMI sources over an IGMP network switch to the intended receivers (RX) via Transmitters (TXs)

---



Full HD Resolution

Supports high-definition video resolution up to1080p (1920x1080) @60Hz, HDCP 1.4 to deliver a clear picture quality and local HDMI loop-out allows you to monitor the extended display from the source location

---

IR Extension

IR pass-through feature allows remote control of the HDMI source device and playback function at the remote display

---

High Performance

Offers a true 10.2Gbps video bandwidth and supports stereo audio



---

RS-232 Control

Bi-direction function and pass-through connection to control RS-232 enable devices in either direction

---

Flexible Control

Easily switch and setup remote displays via front panel LED digital channel buttons or attached remote control, and video control software
Video control software: to select and switch between source devices

---

Multiple Connectivity Ports

Comes with one HDMI video input port, one HDMI video loop-out port, one HDMI video output port, two RJ45 network ports, two RS-232 ports, one 3.5mm IR emitter port, one 3.5mm IR receiver port, Channel switch buttons, Connect TX channel buttons, two reset buttons, two DC power jacks (5V/2A)



Connection



---



H.264 Compression

HDMI signal is encoded into H.264 to be sent through the network router or switch then decoded before arriving at the specified display. Ensures enough bandwidth is available to pass multiple HDMI signals over one network

---

Maximum Compatibility

Supports Plug-n-play. No driver installation required.
The reset button allows displays to be re-detected if no displays are detected

---

Metal Housing Design

Protects the inside PCBA, also enhance the heat dissipation for better performance. Military-grade component for long service life

---

Applications

• Video Conference room	• Show room	• Classroom	• Broadcasting	• Digital signage	• Dental office
• Hospitality	• Supermarket	• Shopping center	• Sport bar	• Restaurant	• Retail
• Trade show	• Church	• Airport	• Control center	• Security center	• Surveillance control center

---

Need to Know Before Buying

1. Please confirm your computer or device with HDMI port



2. Check the extended and local displays/monitors with HDMI port and support 1080p@60Hz resolution



3. Please ensure using UTP Cat5e/Cat6/Cat7 cable for the best video quality and accurate transmission distance

4. IGMP Switch or Managed Ethernet Switch is recommended for the best performance and reliability

5. Transmitter (TX) channel must be different, otherwise the system will be broken down

• Interface
• Package Contents

---

Specifications

Video
HDMI	1x input, 1x output, 1x loop-out
Resolution	1080p (1920x1080) / 1080i / 720p / 480p @60Hz, HDCP 1.4
Transport protocol
HDbitT protocol	audio/video digital connection transmission protocol
Audio
Stereo audio from HDMI, support 192Kbps bit rate
IR pass-through
allows remote control of the HDMI source device and playback function at the remote display Full frequency: 20KHz to 60KHz
RS-232 control
Bi-direction function and pass-through connection to control RS-232 enables devices in either direction
Power
Power adapter	Input: 100-240V/50-60Hz, Output: DC 5V/2A
UL listed	E335801/Level: VI
Environmental conditions
Operating temperature	32 to 122 degrees F
Storage temperature	14 to 144 degrees F
Relative humidity	0% to 90% RH (non-condensing)
Product Info
Encoder unit (TX)	Dimensions: 5.27” (L) x 0.94” (H) x 3.30" (W) Weight: 0.60lbs Color: black Housing material: metal
Decoder unit (RX)	Dimensions: 5.27” (L) x 0.94” (H) x 3.30" (W) Weight: 0.60lbs Color: black Housing material: metal (Housing with wall mount design)
Unit package
Dimensions	9.45” (L) x 3.15” (H) x 6.93" (W)
Weight	2.36 lbs
Certifications/Standards
FCC, CE, RoHS, REACH
UPC code: 662774045092
Warranty: 2 years limited
Country of origin: China

---

Interface



Encoder unit (TX):

• 1x 19-pin, HDMI, Female (input)
• 1x 19-pin, HDMI, loop-out, Female (output)
• 1x 3-pin, RS-232 terminal block, Female
• 1x 3.5mm infrared jack, IR emitter (output)
• 1x 8-pin, RJ45 (output)
• 2x Switch TX channel buttons, up/down
• 1x Reset button
• 1x DC power jack, 5V/2A

Decoder unit (RX):

• 1x 19-pin, HDMI, Female (output)
• 1x 3-pin, RS-232 terminal block, Female
• 1x 3.5mm infrared jack, IR receiver (input)
• 1x 8-pin, RJ45 (input)
• 2x Switch RX channel buttons, up/down
• 2x TX channel buttons, up/down (for TX connection)
• 1x Reset button
• 1x DC power jack, 5V/2A

---

Package contents

• 1x HDMI over IP Extender with IR- Kit
• 1x 3.5mm IR emitter extension cable
• 1x 3.5mm IR receiver extension cable
• 1x Remote control (for setting TX & RX channels)
• 2x 3-pin, RS-232 phoenix connectors
• 2x DC power adapter (5V/2A)
• 1x Installation kit
• 1x User Reference Guide