Skip to the beginning of the images gallery

HDMI Over IP Extender Kit, IR Control, 4K30Hz, 120m

Extends HDMI audio/video signals over cost effective Cat 6/7 cable, while maintaining signal strength and superior audio/video quality

Discontinued

SKU

CE-H25D11-S1

$229.99

Join our free Membership Program and save 5% off every order

We ship all orders within 1 business day

Lifetime technical support on all of our products

45-day return window and money-back guarantee

WARNING: This product can expose you to chemicals including Cadmium, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Overview

Features Applications Need to Know Before Buying Overview Replacement: CE-H25D11-S2 Extends HDMI audio/video signals over cost effective Cat 6/7 cable, while maintaining signal strength and superior audio/video quality Features Transmits HDMI audio and video signals to a remote display/monitor over UTP Cat6/7 cable up to 394ft (120m) and sends the 4K HD resolution to the receiver for stable transmission and cost saving. Allows multiple receivers to be used simultaneously in multiple configurations What is HDbitT? HDbitT is a new generation audio/video digital connection transmission protocol solution. Provides stable performance, long-distance transmission, and high-definition signal Extend Distance This HDMI 4K30Hz HDbitT over IP Extender designed for transmission/security, HDMI signals up to 394ft (120m) through HDbitT protocol and Gigabit Ethernet switch to a remote HDMI display Highly Scalable Works as a scalable TX/RX matrix over the dedicated IP network and extends/splits HDMI signals to multiple displays. Allows up to 256 total units, the additional receiver unit (part#- CE-H25E11-S1) is sold separately Note: IGMP Gigabit Switch is recommended for best performance and reliability VLAN setup supported* create a separate VLAN for each TX and its corresponding RX’s 4K HD Resolution Supports high-definition video resolution up to 4K (3840x2160) @30Hz, HDCP 1.4 to deliver a crystal-clear picture quality IR Extension IR pass-through feature allows remote control of the HDMI source device and playback function at the remote display High Performance Offers a true 10.2Gbps video bandwidth and supports stereo audio Multiple Connectivity Ports Comes with HDMI video input port, one HDMI output port, two RJ45 network ports, one 3.5mm IR emitter port, one 3.5mm IR receiver port, two reset buttons, two DC power jacks (5V/2A) Connection Maximum Compatibility Supports Plug-n-play. No driver installation required The reset button allows displays to be re-detected if no displays are detected Metal Housing Design Protects the inside PCBA, also enhance the heat dissipation for better performance. Military-grade component for long service life Applications Digital signage Broadcasting Video conference room Show room Classroom Dental office Hospitality Supermarket Shopping center sport bar Restaurant Retail Trade show Church Airport Control center Security center Surveillance control center Need to Know Before Buying 1. Please confirm your computer or device with HDMI port 2. Check the extended display/monitor with HDMI port and supports 1080p@60Hz resolution 3. Please ensure using UTP Cat6 or Cat7 cable for the best video quality and accurate transmission distance 4. IGMP Switch or Managed Ethernet Switch is recommended for the best performance and reliability

Specifications

Interface
Package Contents

Specifications

Video
HDMI	1x input, 1x output
Resolution	4K @30Hz, 1080p/1080i/720p/480i/480p @60Hz
Transport protocol
HDbitT protocol	Audio/video digital connection transmission protocol
Audio
Stereo audio from HDMI, support 192Kbps bit rate
IR pass-through
Allows remote control of the HDMI source device and playback function at the remote display Full frequency: 20KHz to 60KHz
Power
Power adapter	Input: 100-240V/50-60Hz, Output: DC 5V/2A
UL listed	E335801/Level: VI
Environmental conditions
Operating temperature	32 to 122 degrees F
Storage temperature	14 to 158 degrees F
Relative humidity	0% to 90% RH (non-condensing)
Product Info
Transmitter unit (TX)	Dimensions: 4.45” (L) x 0.94” (H) x 3.70" (W) Weight: 0.37lbs Color: black Housing material: metal (Housing with wall mount design)
Receiver unit (RX)	Dimensions: 4.45” (L) x 0.94” (H) x 3.70" (W) Weight: 0.37lbs Color: black Housing material: metal (Housing with wall mount design)
Unit package
Dimensions	7.83” (L) x 3.15” (H) x 5.87" (W)
Weight	1.67 lbs
Certifications/Standards
FCC, CE, RoHS, REACH
Warranty: 2 years limited
Country of origin: China