Specifications
- Compliant with HDMI 1.4 and HDCP 1.4
- Video bandwidth up to 10.2Gbps (340MHz per channel)
- Output resolution up to 4K@60Hz YUV 4:2:0 8-bit
- HDR not supported
- 4K@60Hz YUV 4:4:4 not supported
- Support Mic input
- Customizable Control Panel supports IR Learning for convenient device control
- Support UPNP
- HDMI cable: 6.6ft/2m (Input & Output)
- Firmware update via Micro USB port
- Transmission protocol: HDBaseT technology
- Transmission distance:
- CAT6a/7: 4K@60Hz YUV 4:2:0 8-bit: Up to 131ft (40 meters); 1080p: Up to 230ft (70 meters)
- CAT5e/6: 4K@60Hz YUV 4:2:0 8-bit: Up to 115ft (35 meters); 1080p: Up to 197ft (60 meters)
- Product:
- Transmitting unit (TX):
- Dimensions: 4.14" (L) x 3.50" (W) x 1.74" (D)
- Weight: 0.53 lbs
- Connectors:
- 2x 19-pin HDMI, Type A, Female, Input
- 1x 8-pin, RJ45, HDBaseT/PoC, Output
- 1x 8-pin, RJ45, Connect to Control Panel Power/RS-232
- 1x Blue-Backlight button, Source select
- 1x 4-pin USB Type-B, Female, Connect to PC
- 1x 5-pin Micro USB, Firmware update
- 1x Reset button
- Receiving unit (RX):
- Dimensions: 9.84" (L) x 1.22" (W) x 5.12" (D)
- Weight: 3.31 lbs
- Connectors:
- 1x 19-pin HDMI, Type A, Female, Output
- 1x 8-pin, RJ45, HDBaseT/PoC, Input
- 1x 8-pin, RJ45, TCP/IP Network
- 1x 4-pin USB, From Touchscreen
- 1x 3.5mm jack, IR Out
- 1x 3-pin, RS-232, Phoenix connector
- 1x 2-pin, Remote Mute, Phoenix connector
- 1x 3-pin, Audio Line out, Phoenix connector
- 1x 3-pin, MIC input, Phoenix connector
- 1x 4-pin, 2x20Watt @4 Ohm, Power connector
- 1x Power jack, DC 24V/2.71A
- Control Panel:
- Dimensions: 4.49" (L) x 2.76" (W) x 1.34" (D)
- Weight: 0.31 lbs
- Connectors:
- 1x 4-pin USB Type-A, U-disk configuration data
- 1x 8-pin, RJ45, Connect to Transmitter Power/RS-232
- 1x Volume Knob, volume control
- 4x Blue-backlight button, ON / HDMI 1 / HDMI 2 / OFF control
- 1x IR sensor, Receive IR signal
- 1x 3-Pin, RS-232, Phoenix connector
- 1x 5-pin, Micro USB, Firmware update
- Unit Package:
- Dimensions: 15.35" (W) x 2.76" (H) x 11.41" (D)
- Power adapter:
- Input: 100-240V / 50-60Hz
- Output: DC 24V/2.71A
- Environmental conditions:
- Operating temperature: 32 to 122 degrees F
- Storage temperature: 14 to 158 degrees F
- Relative humidity: 10% to 90% RH (non-condensing)
- Certifications/Standards: FCC, CE, RoHS
- Warranty: Three years limited
- Country of origin: China
System Requirements
- Windows and Mac OS independent
- Solid copper CAT5e/6/6a/7 cable using T-568B wiring standard
- CAT6a or better recommended
Package contents
- HDMI 4K HDBaseT Wallplate Kit (Transmitter / Receiver / Control Panel)
- Power adapter
- Receiver mounting ears (2)
- Screws (4)
- Receiver rubber feet (4)
- 4-Pin Terminal Block
- 3-Pin Terminal Block (3)
- 2-Pin Terminal Block
- IR emitter
- USB A to B control cable
- White face plate
- User Manual
|